PAGTATAYA: Panuto: Tukuyin o kilalanin ang mga kagamitan na inilalarawan sa pangungusap. Isulat ang titik ng tamang sagot sa iyong kuwaderno.
1. Ito ay ginagamit na pambalot ng mga nababalatan pati ang mga dugtungan na wire upang maiwasan ang makuryente.
a. pliers b. electrical tape c. flat cord wire d. cutter
2. Ginagamit ito para luwagan o higpitan ang turnilyong may manipis na pahalang.
a. pipe cutter b. flat screwdriver c. long nose d. philips screwdriver
3. Isang kagamitang panghawak o pamputol ng manipis na kable ng kuryente.
a. Pliers b. long nose pliers c. cutters
4. Ito ay metal na bagay, na ginagamit sa pagputol ng alambre at kawad.
a. side cutting pliers b. long nose pliers c. combination pliers d. cutters
5. Ito ay ginagamit sa pagpaluwag o paghigpit ng tornilyo na ang dulo ay hugis krus.
a. philips screwdriver b. flat screwdriver c. cutters d. pliers
nonsense answer will be reported a good answer will be ranked brainliest.
Answers & Comments
Answer:
1.B
2.B
3.B
4.D
5.A
Explanation:English and Tagalog
1.An electrical tape is a type of thick adhesive tape used chiefly to cover exposed electric wires.
2.Ito ay mayroong flat na sukat at ginagamit sa mga flat na turnilyo. Para magamit ito, itapat ang screwdriver sa turnilyo at ikutin ito clockwise o counterclockwise depende kung luluwagan o sisikipan ang isang turnilyo. Ang screwdriver ay ginagamit sa pagkukumpuni ng mga gadgets at iba pang gamit.
Ang screwdriver ay isa sa mga halimbawa ng tools o kagamitan na ginagamit sa pag-aayos. Ito ay maaaring may iba pang sukat - pa-cross or X at pa-star. Ito rin ay maaaring manual o de-batterya o de-kuryente.
3.Use to grip small objects, reach awkward places, holding wires, bend loops, and attach wires. Work involving smaller gauge wire.
4.They cut wire by indenting and wedging a cable apart (as opposed to shearing like scissors). The name comes from how the cutting edges of the jaws are set at an angle (hence the name "diagonal"). They are also known as side cutters, flush cut pliers, side cutting pliers, wire cutters, diagonal cutting nippers.
5.Used to fit screws with Phillips heads, which have a cross-shaped recess - hence the alternative name of cross screwdriver. They were invented to cope with higher torsion.
DEAL:
can i get brainliest please
#CARRYONLEARNIING