hat I Have Learned
Directions: Read each item carefully. Choose the appropriate word inside the box
that will complete the sentence below. Write your answer on a separate sheet of
paper.
result fillers clean large gouge plan
80 to 100-grit dust back paper
360-grit Top materials sharp knife
1. Remove ______________ every time after sanding with clean rag.
2. Put _____________ into the cracks and holes of wood before polishing uneven
surfaces.
3. Use _____________ sandpaper when sanding rough surfaces of wood.
4. When painting, let the first coating dry thoroughly before applying the second
coating until you arrive the best ________.
5. When applying varnish, always _____________ the parts of the product.
6. Remove _____________________ of gold leaf before laying on the surface of the
object.
7. At the start of wood turning, use ___________________ to rough out and round
off the piece.
8. In refining the wood surface use _____________ or higher sandpaper.
9. When painting, it should be done at the ___________ part going downward.
10. Before doing any method of enhancing a product, a person should have a
____________.