Answer:

Steps/Procedure in Silkscreen Printing using emulsion

Prepare the Design to be used. The design is then stenciled to a transparent Acetate Film.

Prepare the Mesh Screen to be soaked in a light-reactive emulsion(means it is sensitive to light).

Place the Acetate Film (from step 1) on the soaked Mesh Screen

Dry the Mesh Screen using a bright light. This will harden the emulsion which is not covered by the Acetate Film.

Finalizing the Stencil by washing the remaining Emulsion

Prepare the printing process by securing the position of the mesh screen, ink, and garment according to the design layout.

Apply the color pigment by adding ink starting on the top of the mesh screen and press downwards using a squeegee.

Drying the applied ink and clean the residues by washing the garment.