Fill in the blanks with the parts of the microscope based on the function given:
_______________1.It is used with the LPO to bring the specimen into focus.
_______________2. Collects and reflects light upward.
_______________3. It is usually marked 10x.It is used to locate and show the outline of the specimen.
_______________4 It has a short tube with two lenses. It magnifies the image formed by the objectives. It is marked 1ox, 5x, etc on its surface.
_______________5. Where the instrument is held in transit.
_______________6. Black top of the revolving nosepiece meant to protect the objectives from dust.
_______________7. Permits the upper part of the microscope to be tipped back.
_______________8. It is where the specimen is placed.
_______________9. It holds the draw tube and serves as the attachment to the objectives.
_______________10. It supports the whole microscope.
_______________11. It is used together with the HPO to sharpen the focus.
_______________12. It is longer than the LPO and usually marked 40x or 60x.It is used to focus on a specific part of the specimen.
_______________13. A white disk to get the desired objective in place.
_______________14. It houses the ocular.
_______________15. Directs the maximum amount of light upon the object