1. List the safety procedures in using hand tools and equipment
2. Give at least five (5) procedures in cleaning, tightening and simple repair of hand tools, equipment and paraphernalia
3. Give two common malfunctions in hand tools, equipment and paraphernalia.
4. Enumerate types of forms used in reporting to property custodian?
PLEASE HELP me i really need it now ( T-'-T )
CORRECT ANSWER = BRAINLIEST
NONSENSE ANSWER = REPORT
Answers & Comments
Answer:
1.10 Basic Safety Rules For Using Hand Tools
Inspect regularly. Regularly inspect your tools to make sure that they are in good condition.
Wear gloves. ...
Carry with care. ...
Don't pocket sharp objects. ...
Be aware of your surroundings. ...
Use the right tools. ...
Follow instructions. ...
Clean and return.
2.Hand tools and equipment are subjected to different levels of abuse while in use. These abuses may result in the tools being dirty, loosely connected or even damaged. Before using any tool or equipment, it is a must that they be inspected properly to ensure that they are operational and safe.
One basic thing to remember to keep hand tools, equipment and paraphernalia clean is to make sure that the workplace is properly organized.
The work area must always be kept neat and tidy.
All tools and equipment must be placed in a clean and dry place.
Clean tools and equipment work more efficiently. This lessens the effort needed to operate them and reduces the possibility of mishaps.
Before cleaning any tool, be sure to wear the proper personal protective equipment (PPE). Gloves, masks and goggles are usually worn when cleaning tools since most cleaning agents and solutions are harmful to the human body.
Only use cleaning agents as prescribed by the tool or equipment’s manufacturer. Follow the cleaning procedures as well to make sure that no damage will be inflicted on the tools.
Cleaning the tools after use is highly recommended.
Tools with moving parts often suffer loosening of its parts. This is normal since these segments keep on moving. A tool with loose parts will not function properly and may cause injuries.
Gripping tools such as a plier is an example that needs tightening. A plier’s rivet must be well tightened to be able to grip properly.
Lubricants must also be applied after tightening to reduce the friction.
Driving tools’ handles must also be tightened to reduce hand strain when turning. A loosely connected handle will make it almost impossible to use
3.10 most common hand tool faults.
Using other tools as the hammer.
Using screwdrivers and pliers for enhanced torque.
Replacing a tubing bender with a wrench.
Using torque wrenches as breaker bars.
Using a screwdriver as a chisel.
Incorrect usage of utility knives.
4.A. Equipment Record with Code and Drawing
B. Breakdown/Repair Report
C. Inspection Report