Clean and Re-grease your Bottom Bracket Bearings. Here’s the deal: your cranks are under a ton of load and the bearing which help them spin easily to propel you forward on the road or trail are kind of a big deal. Being close to the road or trail surface, debris flings itself into the space between your chain ring and the frame and eventually, dirt and grime are going to find its way into the bearings and create all sorts of nasty noises while you ride. Periodically, and especially if you ride in wet or muddy conditions, removing your cranks, cleaning and re-greasing your bottom bracket bearings is necessary.

Clean and Re-grease your Headset Bearings. Another common source for creaks, clanks, and rattles is the headset. If you are experiencing noise in the front of the bike as you go over obstacles in the trail or over rough road, it could be a sign that you need to either tighten your headset or clean and re-grease the bearings that often get contaminated with dirt.

Keep your Chain Lubed and Clean and Re-grease Derailleur or Chain Guide Pulleys/Jockey Wheels. Consistent squeaking coming from your drivetrain could be a couple of different issues, but each involves making sure moving parts are well lubricated or greased.

*Tightening bolts to proper torque specifications using a torque wrench is the best way to ensure bolts do not get stripped, components do not break from over-tightening, and everything stays tight while riding.

**There are so many different reasons your bike could be making squeaks, squeals, creaks, pops, and clunks. These are just a few of the common issues you could experience and how to fix them. Always take your bike to a local shop if you have any hesitations with working on your own bicycle.