Answer:
Lettering should be either vertical or sloped at an angle of 2:5.
Do not mix lettering angles on the drawing. ...
Use only uppercase lettering on the drawing.
All main titles are to be 5mm high lettering.
All main titles (eg PLAN, ELEVATION and SECTION) are to be 20mm below the elevation.
Explanation:
ok
Copyright © 2024 EHUB.TIPS team's - All rights reserved.
Answers & Comments
Answer:
Answer:
Lettering should be either vertical or sloped at an angle of 2:5.
Do not mix lettering angles on the drawing. ...
Use only uppercase lettering on the drawing.
All main titles are to be 5mm high lettering.
All main titles (eg PLAN, ELEVATION and SECTION) are to be 20mm below the elevation.
Explanation:
ok