VI. Arrange the steps in doing home repairs. Write 1-5 on the blank.
A. Broken chair
___1.Place the chair upside down.
___2.Carefully attach the new leg on the chair by nailing it.
___3. Measure the length of the new wood and make a pencil mark.
___4.Cut the wood along the pencil mark.
___5.carefully measure the length of the broken leg to be replaced.
B. Worn-out plug
___1. tie an underwriter's knot at the end of the cord.
___2.cut the old plug from the cord.
___3.lightly press the knot down in the space on the flat side of the plug cap.
___4.pull the new plug apart and lay the base to one side.
___5.remove the insulation from the end of the cord.
A. Broken chair
___1.Place the chair upside down.
___2.Carefully attach the new leg on the chair by nailing it.
___3. Measure the length of the new wood and make a pencil mark.
___4.Cut the wood along the pencil mark.
___5.carefully measure the length of the broken leg to be replaced.
B. Worn-out plug
___1. tie an underwriter's knot at the end of the cord.
___2.cut the old plug from the cord.
___3.lightly press the knot down in the space on the flat side of the plug cap.
___4.pull the new plug apart and lay the base to one side.
___5.remove the insulation from the end of the cord.
Answers & Comments
Verified answer
________________________________
VI. Arrange the steps in doing home repairs. Write 1-5 on the blank.
A. Broken chair
1 - 1.Place the chair upside down.
5 - 2.Carefully attach the new leg on the chair by nailing it.
3 - 3. Measure the length of the new wood and make a pencil mark.
4 - 4.Cut the wood along the pencil mark.
2 - 5.carefully measure the length of the broken leg to be replaced.
B. Worn-out plug
1 - 1. tie an underwriter's knot at the end of the cord.
3 - 2.cut the old plug from the cord.
4 - 3.lightly press the knot down in the space on the flat side of the plug cap.
5 - 4.pull the new plug apart and lay the base to one side.
2 - 5.remove the insulation from the end of the cord.
________________________________