sentences below are the ten steps on how to focus a specimen under a microscope. Arrange the following steps from 1-10 according to their proper order.
Brainleist ko ang tama po ang sagot
Brainleist ko ang tama po ang sagot
Add an Answer
More Questions From This User See All
Answers & Comments
Answer:
Eto po answer ko tama po ito :)
1 - Set the LPO in line with the eyepiece. Open the iris diaphragm.
2 - Adjust the mirror so that it faces the light source; then set it at an angle to reflect light towards the stage.
3 - Place the mounted specimen on the stage.
4 - Hold in place using the stage clips.
5 - While looking at the side of microscope, carefully turn clockwise the coarse adjustment knob to lower the body tube until the LPO is about 1 mm from the specimen.
6 - With both eyes open, look with one eye through the eyepiece.
7 - Slowly turn the coarse adjustment knob counterclockwise to raise the objective until the image of the object comes into clear focus.
8 - To focus under HPO, turn the revolving nosepiece slowly to shift from LPO to HPO.
9 - Look through the eyepiece, if the specimen is not in clear focus, lower the HPO slowly and carefully until it almost touches the slide.
10 - With your eye on the eyepiece, move the fine adjustment knob on a clockwise direction until the specimen comes into focus.
Ito po sagot ko thank you!