Learning Task 2:
Directions: Give your own example on the following key terms as a front office staff.
EXAMPLE IN THE WORKPLACE
HIERARCHY OF CONTROLLING
HAZARD/RISK
1.Identifying the hazard
(What is the hazard?)
2. Assessing the risks
(Evaluate the hazard.)
3. Eliminating hazard/risk
(How will you avoid the hazard)
4. Engineering Control
(What are your measures to control
the hazard?)
5. Administrative Control
(How will you work out the hazard?
6. Use Personal Protective Equipment,
(What PPE will you use?)
Directions: Give your own example on the following key terms as a front office staff.
EXAMPLE IN THE WORKPLACE
HIERARCHY OF CONTROLLING
HAZARD/RISK
1.Identifying the hazard
(What is the hazard?)
2. Assessing the risks
(Evaluate the hazard.)
3. Eliminating hazard/risk
(How will you avoid the hazard)
4. Engineering Control
(What are your measures to control
the hazard?)
5. Administrative Control
(How will you work out the hazard?
6. Use Personal Protective Equipment,
(What PPE will you use?)
Answers & Comments
Answer:
1. A hazard is a potential source of harm. Substances, events, or circumstances can constitute hazards when their nature would allow them, even just theoretically, to cause da% >¬< mage to health, life, property, or any other interest of value. The probability of that harm being realized in a specific incident , combined with the magnitude of potential harm, make up its risk, a term often used synonymously in colloquial speech.
2.The hazard evaluation process will recognize and evaluate chemical, physical and biological hazards within the workplace to determine if proper controls are present and control unacceptable exposures.
3.Fortunately, there are only a few things to remember to prevent most of the problems and avoid potential hazards.
Turn the power off. ...
Inform others. ...
Lockout/tagout (LOTO). ...
Stay away from wires. ...
Maintain equipment. ...
Wear personal protective equipment (PPE). ...
Avoid arc flash areas.
4.What are Control Measures?
Eliminate the hazard. ...
Substitute the hazard with a lesser risk. ...
Isolate the hazard. ...
Use engineering controls. ...
Use administrative controls. ...
Use personal protective equipment.
5.Physical Inspections. This is the traditional method of identifying hazards by walking around the place of work with the aid of a check list. Task Analysis. Look at the tasks in each job (fitness instructor, cleaner, personal trainer etc) and observe that person performing their tasks. Accident Investigation Details.
6.Personal protective equipment may include items such as gloves, safety glasses and shoes, earplugs or muffs, hard hats, respirators, or coveralls, vests and full body suits.
Explanation:
I hope it's help
Mark me as branliest thank you
Carryonlearning