POST TEST
Directions: Read each statement carefully. Mark the underlined word
with if it is correct and an X if it is wrong then replace it with the right word.
1. Avoid throwing a tool to anybody; instead, shoot it over to him carefully.
2. Avoid setting off the distances individually by moving the scale to a new direction from time to time, because slight errors in the measurements may accumulate and give rise to a large error.
3. Do not push too much of the steel tape of pull-push rule to the coil spring to avoid damage.

4. Report defective measuring tools and any hazard to instructor tomorrow. 5. Oil the movable parts of the measuring tools such as zigzag rules, calipers,
dividers, and compasses to avoid stock-up.
6. Be sure to inspect tools before using them. This is to check if they are in
moving condition.
7. After using a tool, clean it thoroughly with an oily cloth.
8. Do not abuse or misuse any piece of drawing instruments.
9. Pick up the triangle by its tip and tilt the T-square blade downward slightly before moving.
10. Organizing and storing these items have a great deal to do with keeping them in tiptop shape and good working condition.