Answer:

EYEPIECE

Eyepiece Lens: the lens at the top that you look through, usually 10x or 15x power.

TUBE

Tube: Connects the eyepiece to the objective lenses.

ARM

Tube: Connects the eyepiece to the objective lenses.

REVOLVING NOSEPIECE

Revolving Nosepiece or Turret: This is the part that holds two or more objective lenses and can be rotated to easily change power.

OBJECTIVE LENS

Objective Lenses: Usually you will find 3 or 4 objective lenses on a microscope. They almost always consist of 4X, 10X, 40X and 100X powers.

ROCK STOP

Rack Stop: This is an adjustment that determines how close the objective lens can get to the slide.

STAGE

Stage: The flat platform that supports the slides. Stage clips hold the slides in place.

STAGE CLIP

Stage clips: They are spring-loaded to hold the slide edges and lock the slide in place so that the stage controls can move the position of the slide smoothly.

CONDENSER

Condensers are located above the light source and under the sample in an upright microscope, and above the stage and below the light source in an inverted microscope.

COARSE FOCUS

Coarse Focus: This is the knob on the side of the microscope that moves the objective lens up and down. It is used in conjunction with the fine focus.

FINE FUCOS

Fine Focus: A knob used to fine-tune the focus of a specimen in conjunction with the coarse focus.

ILLUMINATOR

Illuminator. is the light source for a microscope, typically located in the base of the microscope.

BASE

Base. of the microscope supports the microscope and houses the illuminator.

Explanation:

HOPE ITS HELP

CARRY ON LEARNIN