Answer:

Home » Sewing Tutorials » Sewing For Beginners

HOW TO USE A SEWING MACHINE - SIMPLE FOR BEGINNERS

Ready steady go…..it’s time to get to grips with how to use a sewing machine. Sewing by machine is not that difficult, but getting the right basics in place will make all the difference to your journey and make the ride simple and successful.

6 STEPS

GETTING ACQUAINTED WITH THE SEWING MACHINE

Get Started: Now, when everything is in place, you are ready to get your first fabric stitched on your machine.

Guide your bobbin: Ensure the bobbin is properly loaded under the needle without which the stitching cannot be done. This small spool of thread plays a very significant role in supplying thread that is required for uninterrupted sewing. First, you have to insert thread in the spool and wind it around the bobbin. Next, you should lock the bobbin in the space provided. Placing the thread in the larger spool. Then apply some pressure and observe how your bobbin wind the thread until it’s completely full. Once done, you have to load your bobbin in the bobbin case which is mostly situated underneath the needle.

Guide your thread: After you are done placing and locking your bobbin, you have to place your thread now. On the top of your machine, there is a large spool pin. Place your thread on it and follow the instructions/arrows for correct placement of your thread. For inserting the thread, bring it down and insert it through the hole of the needle. Don’t forget to leave few inches of the thread for the top and the bottom thread to get connected.

6 STEPS

Go through the Manual:

For a better understanding, read the sewing machines for beginners manual thoroughly. In case the you don’t have a manual, you can search online.

Ensure All Parts Are in Place:

Ensure all the essential parts like bobbin, needle, pedal and bobbin case is in place. Don’t forget to switch on the power button which is mostly on the right side of the machine to get started.

GUIDELINES FOR THREADING THE BOBBIN AND THE NEEDLE

Get Started:

Now, when everything is in place, you are ready to get your first fabric stitched on your machine.

Guide your bobbin:

Ensure the bobbin is properly loaded under the needle without which the stitching cannot be done. This small spool of thread plays a very significant role in supplying thread that is required for uninterrupted sewing. First, you have to insert thread in the spool and wind it around the bobbin. Next, you should lock the bobbin in the space provided. Placing the thread in the larger spool. Then apply some pressure and observe how your bobbin wind the thread until it’s completely full. Once done, you have to load your bobbin in the bobbin case which is mostly situated underneath the needle.

Guide your thread:

After you are done placing and locking your bobbin, you have to place your thread now. On the top of your machine, there is a large spool pin. Place your thread on it and follow the instructions/arrows for correct placement of your thread. For inserting the thread, bring it down and insert it through the hole of the needle. Don’t forget to leave few inches of the thread for the top and the bottom thread to get connected.

GETTING READY TO USE

Get Ready For Some Action: You will be able to see the different setting options On the display of your sewing machine pertaining to different stitches. Go for the one that you like. Remember, the straight stitch is one of the most useful stitches: most of the sewing machines have number one setting options for it. Now, raise the pressure foot and place the fabric underneath the needle. You must have a proper control over the pressure foot and release it whenever needed. With gentle strokes on the pedal, start sewing now. In case of any problem, check out the troubleshooting options in your manual.

Your manual book can come in handy at times when you find yourself in a fix. Now that you know how to use your sewing machine, go ahead and start stitching.