1.Pencils-Do not use solvents or cleaners to clean the pencil. A soft cloth and water will usually remove any dirt. Use a soft polishing cloth to wipe down metal parts
2.Ruler-Ensure the rule is clean and dry before storing. They can usually be cleaned with soap and water or a mild solvent. Metal rules can have a little bit of oil rubbed onto them, occasionally, to help prevent rust. They should be stored flat in a drawer or toolbox, so they won't get bent and the edges won't get damaged.
3.Protractor-Cleaning. If the tool does become dirty after being used, simply use a soft, moist cloth to clean it. Do not allow materials to enter or build up around the O-ring as this could affect the rotational movement of the arms
4.Compass-Proper care will keep a compass functioning for many years. Store a magnetic compass away from computers and other electrical devices that can generate magnetic fields. Exposure to magnetic fields can damage a compass. Keep a magnetic compass away from heaters and do not store in a hot place such as a car.
5.T-square-Take care not to damage the ruling edge of the T-square.
Take care not to damage the ruling edge of the T-square.Dents will make it unusable.
Take care not to damage the ruling edge of the T-square.Dents will make it unusable.Always clean the T-square before use.
Take care not to damage the ruling edge of the T-square.Dents will make it unusable.Always clean the T-square before use.Don't use the T-square as a hammer - or an axe!
Take care not to damage the ruling edge of the T-square.Dents will make it unusable.Always clean the T-square before use.Don't use the T-square as a hammer - or an axe!Don't let the T-square fall on the floor.
Explanation:
ihopeithelppabrainliestpo^_^
1 votes Thanks 2
gonfreecss08221993
thayou shaneanne938. ,3,4,5 lang kailangan ko jaan ,salamat sa tulong
Answers & Comments
1.Pencils-Do not use solvents or cleaners to clean the pencil. A soft cloth and water will usually remove any dirt. Use a soft polishing cloth to wipe down metal parts
2.Ruler-Ensure the rule is clean and dry before storing. They can usually be cleaned with soap and water or a mild solvent. Metal rules can have a little bit of oil rubbed onto them, occasionally, to help prevent rust. They should be stored flat in a drawer or toolbox, so they won't get bent and the edges won't get damaged.
3.Protractor-Cleaning. If the tool does become dirty after being used, simply use a soft, moist cloth to clean it. Do not allow materials to enter or build up around the O-ring as this could affect the rotational movement of the arms
4.Compass-Proper care will keep a compass functioning for many years. Store a magnetic compass away from computers and other electrical devices that can generate magnetic fields. Exposure to magnetic fields can damage a compass. Keep a magnetic compass away from heaters and do not store in a hot place such as a car.
5.T-square-Take care not to damage the ruling edge of the T-square.
Take care not to damage the ruling edge of the T-square.Dents will make it unusable.
Take care not to damage the ruling edge of the T-square.Dents will make it unusable.Always clean the T-square before use.
Take care not to damage the ruling edge of the T-square.Dents will make it unusable.Always clean the T-square before use.Don't use the T-square as a hammer - or an axe!
Take care not to damage the ruling edge of the T-square.Dents will make it unusable.Always clean the T-square before use.Don't use the T-square as a hammer - or an axe!Don't let the T-square fall on the floor.
Explanation:
i hope it help pa brainliest po^_^