Part 1. Enumeration Directions: Given the tools below. Write down their maintenance process from cleaning, sharpening to storing, (5pts)
1. Bolo Cleaning:
Sharpening:
Storing:
2. Rake Cleaning:
Sharpening:
Storing:
3. Spade Cleaning:
Sharpening:
Storing
!NONSENSE WILL BE REPORTED!
Answers & Comments
Answer:
1. Bolo
Cleaning: Mix a solution of two cups of chlorine bleach and one gallon of water in a bucket. Submerge the tools and let them soak for 10 minutes. Rinse well and dry completely with an old cloth.
Sharpening: To sharp the bolo you need a grinding stone first you need to grind the bolo using the grinding stone it can make it sharp.
Storing: Store your bolo tie in a safe place, and never leave it unattended at a place where it is exposed to the elements as well as to children and pets. The best option is to keep it in a jewelry box or any other airtight container. Avoid keeping multiple pieces in one box as the stones may get scratched.
2. Rake
Cleaning: To clean rakes, remove dirt clots from tines and wipe with a clean cloth. If your rake has a wood handle, sand smooth then seal with a coat of polyurethane or varnish.
Sharpening: To sharpen the rake were gonna use a Electric Grinding Wheel
Storing: You can purchase a rack or build one. You can store shovels and rakes vertically or horizontally on wall hooks
3. Spade
Cleaning: To clean shovels and spades, knock off any obvious dirt and debris and scrub stubborn areas with a wire brush. Rinse with a garden hose, and wipe the handle with a clean cloth.
Sharpening: The first thing we need to do is to clean first the spade using brush so after it were going to use a metal file and you can use a grinding wheel if that works better so were going to use the metal file were gonna grind it on the spade to sharpen it.
Explanation
Thank you po
Have a good day