1.Varnish is a clear transparent hard protective coating or film. It is not a stain. ... Varnish is primarily used as a wood finish where, stained or not, the distinctive tones and grains in the wood are intended to be visible. Varnish finishes are naturally glossy, but satin/semi-gloss and flat sheens are available
2.Stenciling, in the visual arts, a technique for reproducing designs by passing ink or paint over holes cut in cardboard or metal onto the surface to be decorated. ... In the 20th century stencils are used for such diverse purposes as making mimeographs and fine paintings.
3.Wood carving is a form of woodworking by means of a cutting tool in one hand or a chisel by two hands or with one hand on a chisel and one hand on a mallet, resulting in a wooden figure or figurine, or in the sculptural ornamentation of a wooden object.
4.What are the methods that you can do in enhancing the woods?
Methods of this technique include glueing, chemical gilding, and electroplating. Staining is used to color wood to give an illusion of texture. This may come in two varieties. First, pigment-based stain will color large pores of the wood, while dye-based stain color small pores of the wood.
5.How do you apply wood gloss?
Mix half as much mineral spirits as gloss in a painter's tray. Apply it to the sanded, clean surface of the wood in an even coat with a paintbrush. Apply two coats of polyurethane with a brush. After the seal coat is dry, use a clean brush to evenly apply a coat of undiluted gloss to the surface of the wood.
Answers & Comments
Answer:
1)varnish
2)stencil
3)woodcarvers
4)inhanching
5) paint
1.Varnish is a clear transparent hard protective coating or film. It is not a stain. ... Varnish is primarily used as a wood finish where, stained or not, the distinctive tones and grains in the wood are intended to be visible. Varnish finishes are naturally glossy, but satin/semi-gloss and flat sheens are available
2.Stenciling, in the visual arts, a technique for reproducing designs by passing ink or paint over holes cut in cardboard or metal onto the surface to be decorated. ... In the 20th century stencils are used for such diverse purposes as making mimeographs and fine paintings.
3.Wood carving is a form of woodworking by means of a cutting tool in one hand or a chisel by two hands or with one hand on a chisel and one hand on a mallet, resulting in a wooden figure or figurine, or in the sculptural ornamentation of a wooden object.
4.What are the methods that you can do in enhancing the woods?
Methods of this technique include glueing, chemical gilding, and electroplating. Staining is used to color wood to give an illusion of texture. This may come in two varieties. First, pigment-based stain will color large pores of the wood, while dye-based stain color small pores of the wood.
5.How do you apply wood gloss?
Mix half as much mineral spirits as gloss in a painter's tray. Apply it to the sanded, clean surface of the wood in an even coat with a paintbrush. Apply two coats of polyurethane with a brush. After the seal coat is dry, use a clean brush to evenly apply a coat of undiluted gloss to the surface of the wood.
ayanna sa na makapasaka
⚡pamark Kong pwede lang⚡