Wire Cutter: - To cut the network cable of the required length from the bundle, you can use any standard wire cutter tool or can use a wire cutter tool that is specially designed for the twisted-pair cable. A twisted-pair wire cutter usually includes additional blades for stripping the wire.
Wire Stripper: - This tool is used to remove the outer and inner jackets of the network cable. Typically, you do not need to purchase this tool separately as all standard twisted-pair wire cutters are equipped with wire-strippers.
Crimp tool: - This tool is used to attach the connectors to the cable. Typically, this tool also includes a wire-cutter and wire-stripper. So if you buy a crimp tool, you don't have to buy a wire-cutter and wire-stripper separately.
Basic cable tester
If you can't afford a network cable certifier, you can buy and use this device to manage your network cables. Besides certifying the cable installation, this device provides all remaining functionalities of a network cable certifier. It can test cable length, cross talk, and breaks in the cable. It can also check whether the connectors on both ends of a network cable are properly attached or not.
hope it helps...
3 votes Thanks 3
jijiiijie
1.Wire cutters are commonly used to cut copper, brass, iron, aluminum, and steel wire. Some wire cutters have insulated handles which ensure that you will not get shocked from the wires you're working with. Diagonal cutters have intersecting jaws that cut the wire at an angle, leaving a flat tip
1.WIRE CUTTER - To cut the network cable of the required length from the bundle, you can use any standard wire cutter tool or can use a wire cutter tool that is specially designed for the twisted-pair cable.
WIRE STRIPPER - This tool is used to remove the outer and inner jackets of the network cable
2.CRIMP TOOL - This tool is used to attach the connectors to the cable. Typically, this tool also includes a wire-cutter and wire-stripper.
3.NETWORK CABLE TESTER-A cable tester is a device that is used to test the strength and connectivity of a particular type of cable or other wired assemblies.
Answers & Comments
Answer:
Explanation:
Functions:
If you can't afford a network cable certifier, you can buy and use this device to manage your network cables. Besides certifying the cable installation, this device provides all remaining functionalities of a network cable certifier. It can test cable length, cross talk, and breaks in the cable. It can also check whether the connectors on both ends of a network cable are properly attached or not.
hope it helps...
Answer:
1.WIRE CUTTER - To cut the network cable of the required length from the bundle, you can use any standard wire cutter tool or can use a wire cutter tool that is specially designed for the twisted-pair cable.
WIRE STRIPPER - This tool is used to remove the outer and inner jackets of the network cable
2.CRIMP TOOL - This tool is used to attach the connectors to the cable. Typically, this tool also includes a wire-cutter and wire-stripper.
3.NETWORK CABLE TESTER-A cable tester is a device that is used to test the strength and connectivity of a particular type of cable or other wired assemblies.
Explanation:
I HOPE IT HELPS MY ANSWERS!