MULTIPLE CHOICE Directions: Read the questions carefully. Click the letter of the correct answer.
1. A sign of poor housekeeping includes the following EXCEPT_________ . *
1 point
A. uncluttered and nicely arranged areas
B. presence of items no longer needed
C. no waste bins and containers
D. presence of spills and leaks
2. It is a term which means safe storage of tools, equipment and all items. *
1 point
A. Housekeeping
B. Room tool storage
C. Waste management
D. Waste segregation
3. What is the proper handling of things thrown away in a manner that does not harm anyone or the environment? *
1 point
A. Housekeeping
B. Room tool storage
C. Waste management
D. Waste segregation
4. Some improperly used hand tools that will result to injuries EXCEPT_______. *
1 point
A. file used to remove the drill from the chuck
B. knife used as a screwdriver
C. screwdriver used to tighten and loosen nuts
D. wrench used as a hammer
5. This is a method to segregate waste into biodegradable and non-biodegradable? *
1 point
A. Housekeeping
B. Room tool storage
C. Waste management
D. Waste segregation
6. Poor housekeeping causes accidents such as slips, trips and falls. What will you suggest to avoid these hazards? *
1 point
A. Immediately clean up spills on floor
B. Remove clutters
C. Waste Management
D. All of the above
7. Stacking boxes, drums, flammable, combustible, and other hazardous materials should be stored in approved containers in designated area. You see piles of drums and boxes in the fire exit. Where will you suggest to stack those materials? *
1 point
A. Aisles & stairs
B. Fire exit
C. First aid station
D. Stock room
8. Storing welding tools and equipment is very important in maintaining its functionality. For the welding rods, what is the best way to do in preventing from damaged? *
1 point
A. Do not mind it, anyway these are consumables
B. Leave it on the floor
C. Put in the box
D. Store in an upright position to be kept in a water proof container
9. Waste management includes activities and actions necessary to manage waste segregation from its beginning to final disposal. As an apprentice in the garbage segregation, you are faced to decide which ONE of the following items DOES belong to non-biodegradable container? *
1 point
A. Food waste
B. Human waste
C. Metallic waste
D. Paper waste
10. Good housekeeping practices contribute safety in the workplace. As a cleaner what should you do when you see spilled coffee on the floor? *
1 point
A. Clean up the spill immediately
B. Call maintenance immediately
C. Ignore it
D. Both A and B
11. What is done regularly to keep tools, equipment and workplace in good condition and working order? *
1 point
A. Breakdown
B. Facility
C. Maintenance
D. Simple repair
12. When you put fluid, oil and grease into gears, chains, joints and moving parts of any tools and equipment in order to prevent wear is termed as ____________ . *
1 point
A. Cleaning
B. Lubricating
C. Sharpening
D. Tightening
13. What is a type of minor repairs include servicing of parts that are found to be defective upon inspection? *
1 point
A. Replacing part
B. Lubricating
C. Simple repair
D. Tightening
14. _________ is the work done regularly to keep tool equipment or even a building in good condition and working order. *
1 point
A. Coverage of maintenance
B. Maintenance
C. Preventive maintenance
D. Time-based maintenance
15. What type of routine maintenance gives immediate appropriate attention to simple tool and equipment problem? *
1 point
A. Labelling
B. Maintenance
C. Simple repair
D. Tightening
16. It means to put fluid, oil and grease into gears, chains, joints and moving parts of any tools and equipment. *
1 point
A. Cleaning
B. Lubricating
C. Sharpening
D. Tightening
17. This is a type of corrective maintenance involves repair when equipment falls while in operation. *
1 point
A. Breakdown
B. Cracks
C. Leaks
D. Simple repair
18. What is a process of maintaining and applying the specified torque on bolts and screws, joints, equipment or machine covers? *
1 point
A. Cleaning
B. Lubricating
C. Tightening
D. Simple repair
19. What kind of routine maintenance is done with the use of rags, cleaning solvent, film of oil, and storing tools in their respective boxes or cabinet? *
1 point
A. Cleaning
B. Hand tools sharpening
C. Parts replacement
D. Simple repair
20. What kind of routine maintenance done through the use of an abrasive material such as rubbing block and portable grinder? *
1 point
A. Cleaning
B. Hand tools sharpening
C. Lubricating
D. Replacing
1. A sign of poor housekeeping includes the following EXCEPT_________ . *
1 point
A. uncluttered and nicely arranged areas
B. presence of items no longer needed
C. no waste bins and containers
D. presence of spills and leaks
2. It is a term which means safe storage of tools, equipment and all items. *
1 point
A. Housekeeping
B. Room tool storage
C. Waste management
D. Waste segregation
3. What is the proper handling of things thrown away in a manner that does not harm anyone or the environment? *
1 point
A. Housekeeping
B. Room tool storage
C. Waste management
D. Waste segregation
4. Some improperly used hand tools that will result to injuries EXCEPT_______. *
1 point
A. file used to remove the drill from the chuck
B. knife used as a screwdriver
C. screwdriver used to tighten and loosen nuts
D. wrench used as a hammer
5. This is a method to segregate waste into biodegradable and non-biodegradable? *
1 point
A. Housekeeping
B. Room tool storage
C. Waste management
D. Waste segregation
6. Poor housekeeping causes accidents such as slips, trips and falls. What will you suggest to avoid these hazards? *
1 point
A. Immediately clean up spills on floor
B. Remove clutters
C. Waste Management
D. All of the above
7. Stacking boxes, drums, flammable, combustible, and other hazardous materials should be stored in approved containers in designated area. You see piles of drums and boxes in the fire exit. Where will you suggest to stack those materials? *
1 point
A. Aisles & stairs
B. Fire exit
C. First aid station
D. Stock room
8. Storing welding tools and equipment is very important in maintaining its functionality. For the welding rods, what is the best way to do in preventing from damaged? *
1 point
A. Do not mind it, anyway these are consumables
B. Leave it on the floor
C. Put in the box
D. Store in an upright position to be kept in a water proof container
9. Waste management includes activities and actions necessary to manage waste segregation from its beginning to final disposal. As an apprentice in the garbage segregation, you are faced to decide which ONE of the following items DOES belong to non-biodegradable container? *
1 point
A. Food waste
B. Human waste
C. Metallic waste
D. Paper waste
10. Good housekeeping practices contribute safety in the workplace. As a cleaner what should you do when you see spilled coffee on the floor? *
1 point
A. Clean up the spill immediately
B. Call maintenance immediately
C. Ignore it
D. Both A and B
11. What is done regularly to keep tools, equipment and workplace in good condition and working order? *
1 point
A. Breakdown
B. Facility
C. Maintenance
D. Simple repair
12. When you put fluid, oil and grease into gears, chains, joints and moving parts of any tools and equipment in order to prevent wear is termed as ____________ . *
1 point
A. Cleaning
B. Lubricating
C. Sharpening
D. Tightening
13. What is a type of minor repairs include servicing of parts that are found to be defective upon inspection? *
1 point
A. Replacing part
B. Lubricating
C. Simple repair
D. Tightening
14. _________ is the work done regularly to keep tool equipment or even a building in good condition and working order. *
1 point
A. Coverage of maintenance
B. Maintenance
C. Preventive maintenance
D. Time-based maintenance
15. What type of routine maintenance gives immediate appropriate attention to simple tool and equipment problem? *
1 point
A. Labelling
B. Maintenance
C. Simple repair
D. Tightening
16. It means to put fluid, oil and grease into gears, chains, joints and moving parts of any tools and equipment. *
1 point
A. Cleaning
B. Lubricating
C. Sharpening
D. Tightening
17. This is a type of corrective maintenance involves repair when equipment falls while in operation. *
1 point
A. Breakdown
B. Cracks
C. Leaks
D. Simple repair
18. What is a process of maintaining and applying the specified torque on bolts and screws, joints, equipment or machine covers? *
1 point
A. Cleaning
B. Lubricating
C. Tightening
D. Simple repair
19. What kind of routine maintenance is done with the use of rags, cleaning solvent, film of oil, and storing tools in their respective boxes or cabinet? *
1 point
A. Cleaning
B. Hand tools sharpening
C. Parts replacement
D. Simple repair
20. What kind of routine maintenance done through the use of an abrasive material such as rubbing block and portable grinder? *
1 point
A. Cleaning
B. Hand tools sharpening
C. Lubricating
D. Replacing
Add an Answer
More Questions From This User See All