DEVELOPMENT Learning Task 4: FREEHAND LINE SKETCHING Procedures in sketching horizontal, vertical, inclined, and curve lines 1. Sketch a rectangle at 120 mm x 160 mm. Follow the drawing plates accurately with the given measurements 2. Divide the rectangle into four equal parts 3. Sketch horizontal lines on the first part of the rectangle, start at the left going to the night. (Each line must have 5mm gap distances. 4. Sketch vertical lines on the second part of the rectangle. Start at the top down to the bottom (Each line must have 5mm gap distance). 5. Sketch inclined lines on the third part of the rectangle with a downward stroke. (Each line must have 5mm gap distance. 6. Sketch curve lines from left to right. Each line must have 5mm gap distances Your output will be rated accordingly with the rubrics below Tools/Materials to be used in this activity 1 Oslo paper pencil Critona ACCURACY 25 points All lines are drawn appropriately and freeband Finished output was nestly done pleating 15 points 10 points Some lines are drawn Most of the lines are snappropriately and NOT inappropriately dram an freehand and NOT 10 freehand. Pleasing but erasures Farished output have so NEATNESS may erasures and observable on the finished output​