LESSON 5: TERMINATING AND CONNECTING ELECTRICAL WIRING AND ELECTRONICS CIRCUIT WRITTEN WORK. ACTIVITY 1. A. Fill in the blanks with what is referred to by each of the following. (1 point each) 1. An interconnection of components which provides an electrical path between two or more components. 2. A type of circuit in which the flow of current is cut off. 3. A circuit in which the components are connected from end to end so that the current has only one path to follow through the circuit. 4. A circuit where there is more than one path for the current to flow through. 5. A device used to supply AC or DC voltage. 6. Any device having two states, ON or OFF. 7. A safety device used to protect an electrical circuit from the effect of excessive current. 8. A pathway for carrying an electric current. 9. Components or pieces of equipment connected to a source which draws current from a source. 10. A DC voltage source containing two or more cells that convert chemical energy to electrical energy. 11. It is also known as a twist splice or a pig-tail splice, is a very basic electrical splice that can be done with both solid and stranded wire. 12. It is used to for branch joints to connect a branch wire to a continuous wire. 13. It is an electric connection between two conductors, formed by crossing their bare ends, wrapping one end around the other, and then folding them over. 14. It is the process of joining two or more electronic parts together by melting solder around the connection. 15. It is an electronic measuring instrument that combines several measurement functions in one unit. o​