Learning Task No. 1 : Investigate what materials have the ability to bend, hammer, cut, or pressed. Materials: clay, bottle cap, iron nail, hammer, scissors, cloth Steps: 1. Get all the materials needed. 2. Do the following: 2.1. press a clay I 2.2. bend a plastic bottle 2.3. cut a piece of used cloth 2.4. hammer a piece of nail in a wood 3. Observe what changes happened in each material. 4. Record your observation by completing the graphic organizer below. 1. Press a clay 2. Bend a plastic bottle 3. Cut a piece of cloth 4. Hammer a nail​