Learning Task 1 : The numbered steps in using a focus microscope to correct sequence. Write the answers in your answer sheet. specimens listed in the box are not arranged properly. Arrange each step in their 1. Put the microscope on a table with the arm towards you. 2. In carrying the microscope, hold firmly the microscope's arm with one hand and place the other hand under the base for support. 3. Check the stage from the side. Slowly turn the course adjustment knob to lower the body tube until the lower-power objective almost touches the slide. 4. Turn the course adjustment knob to raise the body tube. 5. Rotate the nosepiece until the low-power objective lens clicks into place. 6. While looking into the eyepiece, adjust the diaphragm and the mirror until you see a bright white circle of light. 7. Put a slide on the stage. Position the specimen over the opening on the stage and use the stage clip to hold it in place. 8. Look into the eyepiece and turn the fine adjustment knob until the specimen is properly focus. high power objective lens clicks in place. Be sure that the lens will hit the higifoto high power objective lens, Gently revolve the nosepiece until the 10. Look into the eyepiece, and gently turn the course adjustment knob until you get the clear focus of the specimen.
Answers & Comments
Verified answer
Answer:
Learning Task 1 :
The numbered steps in using a focus microscope to correct sequence. Write the answers in your answer sheet. specimens listed in the box are not arranged properly. Arrange each step in their
Explanation:
2. In carrying the microscope, hold firmly the microscope's arm with one hand and place the other hand under the base for support. (A)
1. Put the microscope on a table with the arm towards you. (B)
7. Put a slide on the stage. Position the specimen over the opening on the stage and use the stage clip to hold it in place. (C)
3. Check the stage from the side. Slowly turn the course adjustment knob to lower the body tube until the lower-power objective almost touches the slide. (D)
8. Look into the eyepiece and turn the fine adjustment knob until the specimen is properly focus. high power objective lens clicks in place. (E)
10. Look into the eyepiece, and gently turn the course adjustment knob until you get the clear focus of the specimen. (F)
6. While looking into the eyepiece, adjust the diaphragm and the mirror until you see a bright white circle of light. (G)
4. Turn the course adjustment knob to raise the body tube. (H)
9. Be sure that the lens will hit the right high power objective lens, Gently revolve the nosepiece until the 10. (I)
5. Rotate the nosepiece until the low-power objective lens clicks into place. (J)
#BrainlyFast
brainly.ph/question/11995000
2, 1, 7, 3, 4, 8, 6, 9, 5, 10 (yan ang tamang arrangement)