Take a piece of chart paper and make a crease at the center.
Step 2:
Paste the two sides together with glue. Allow it to dry for some time.
Step 3:
Fold both sides of the paper. The thickness of the fold will determine the space inside the bag; this will become the width of the bag, so accordingly make the fold.
Step 4:
Open the folds and along the creases made fold inwards on both the sides as shown.
Step 5:
Fold the bottom of the bag for a length of around 2 inches. This will depend on the size of the bag you are making.
Step 6:
Unfold the last fold made. Along the side crease, fold inwards to form a triangular shaped edge.
Step 7:
Fold the flap inwards and flatten it as shown below. Paste the two flaps together using glue and press so that the base is firm.
Step 8:
Using a punching machine, make two holes on both sides of the bag to attach the handle.
Step 9:
If the bag is plain looking and you want to add some color to it, use watercolors or poster colors to add some designs to the bag. Alternatively, you can use cut gift wrappers to jazz up your bag a little.
Step 10:
Attach a handle to the bag using the holes made. I wanted to use earthy colors, so I went for brown beads. You can attach simple plastic or thread handles to the bag as well.
This is a simple process and a bag can be done well within ten to fifteen minutes. You can do these bags for everyday use from glossy pages of magazine or newspapers.
For this you will need:Chart paper (or any other thick paper)
For this you will need:Chart paper (or any other thick paper)Glue
For this you will need:Chart paper (or any other thick paper)GlueScissors
For this you will need:Chart paper (or any other thick paper)GlueScissorsHandle for the bag
For this you will need:Chart paper (or any other thick paper)GlueScissorsHandle for the bagPunching machine
For this you will need:Chart paper (or any other thick paper)GlueScissorsHandle for the bagPunching machineColors
STEP-BY-STEP
Step 1:
Step 1:Take a piece of chart paper and make a crease at the center.
Step 1:Take a piece of chart paper and make a crease at the center.Step 2:
Step 1:Take a piece of chart paper and make a crease at the center.Step 2:Paste the two sides together with glue. Allow it to dry for some time.
Step 3:
Step 3:Fold both sides of the paper. The thickness of the fold will determine the space inside the bag; this will become the width of the bag, so accordingly make the fold.
Step 4:
Step 4:Open the folds and along the creases made fold inwards on both the sides as shown.
Step 5:
Step 5:Fold the bottom of the bag for a length of around 2 inches. This will depend on the size of the bag you are making.
Step 6:
Step 6:Unfold the last fold made. Along the side crease, fold inwards to form a triangular shaped edge.
Step 7:
Step 7:Fold the flap inwards and flatten it as shown below. Paste the two flaps together using glue and press so that the base is firm.
Step 8:
Step 8:Using a punching machine, make two holes on both sides of the bag to attach the handle.
Step 9:
Step 9:If the bag is plain looking and you want to add some color to it, use watercolors or poster colors to add some designs to the bag.
Step 10:
Step 10:Attach a handle to the bag using the holes made.
Answers & Comments
Steps In making paper Bag
For this you will need:
How To:
Step 1:
Take a piece of chart paper and make a crease at the center.
Step 2:
Paste the two sides together with glue. Allow it to dry for some time.
Step 3:
Fold both sides of the paper. The thickness of the fold will determine the space inside the bag; this will become the width of the bag, so accordingly make the fold.
Step 4:
Open the folds and along the creases made fold inwards on both the sides as shown.
Step 5:
Fold the bottom of the bag for a length of around 2 inches. This will depend on the size of the bag you are making.
Step 6:
Unfold the last fold made. Along the side crease, fold inwards to form a triangular shaped edge.
Step 7:
Fold the flap inwards and flatten it as shown below. Paste the two flaps together using glue and press so that the base is firm.
Step 8:
Using a punching machine, make two holes on both sides of the bag to attach the handle.
Step 9:
If the bag is plain looking and you want to add some color to it, use watercolors or poster colors to add some designs to the bag. Alternatively, you can use cut gift wrappers to jazz up your bag a little.
Step 10:
Attach a handle to the bag using the holes made. I wanted to use earthy colors, so I went for brown beads. You can attach simple plastic or thread handles to the bag as well.
This is a simple process and a bag can be done well within ten to fifteen minutes. You can do these bags for everyday use from glossy pages of magazine or newspapers.
Hope this helps
How to make a Paper Bag
For this you will need:
For this you will need:Chart paper (or any other thick paper)
For this you will need:Chart paper (or any other thick paper)Glue
For this you will need:Chart paper (or any other thick paper)GlueScissors
For this you will need:Chart paper (or any other thick paper)GlueScissorsHandle for the bag
For this you will need:Chart paper (or any other thick paper)GlueScissorsHandle for the bagPunching machine
For this you will need:Chart paper (or any other thick paper)GlueScissorsHandle for the bagPunching machineColors
STEP-BY-STEP
Step 1:
Step 1:Take a piece of chart paper and make a crease at the center.
Step 1:Take a piece of chart paper and make a crease at the center.Step 2:
Step 1:Take a piece of chart paper and make a crease at the center.Step 2:Paste the two sides together with glue. Allow it to dry for some time.
Step 3:
Step 3:Fold both sides of the paper. The thickness of the fold will determine the space inside the bag; this will become the width of the bag, so accordingly make the fold.
Step 4:
Step 4:Open the folds and along the creases made fold inwards on both the sides as shown.
Step 5:
Step 5:Fold the bottom of the bag for a length of around 2 inches. This will depend on the size of the bag you are making.
Step 6:
Step 6:Unfold the last fold made. Along the side crease, fold inwards to form a triangular shaped edge.
Step 7:
Step 7:Fold the flap inwards and flatten it as shown below. Paste the two flaps together using glue and press so that the base is firm.
Step 8:
Step 8:Using a punching machine, make two holes on both sides of the bag to attach the handle.
Step 9:
Step 9:If the bag is plain looking and you want to add some color to it, use watercolors or poster colors to add some designs to the bag.
Step 10:
Step 10:Attach a handle to the bag using the holes made.
#CarryOnLearning! <3