If you want to access the internet at home, you'll need an Internet Service Provider (ISP) and a router to connect to the ISP. ISPs often provide a router with their service. This means more than one computer or device in your house can use the broadband connection at the same time.
First of all, there's the infrastructure. Your internet connection doesn't go straight out into the internet; it has to arrive at your ISP first. After all, ISP means "Internet Service Provider;" you're not getting internet until you connect to them!
To do this, you need to be connected to your ISP in some way. A wired connection is the most common method. This is where a cable transfers data from your router all the way to your ISP.
If you have fiber, it's likely that you have a copper cable that runs from your home to a roadside cabinet or pole on the curb. Once it reaches this point, it uses fiber the rest of the way to your ISP.
However, some lucky people can get a connection directly to their home. This means they have fiber from their house all the way to the ISP, which is a lot faster than a fiber/copper mix.
These technologies are called "Fiber to the Curb" (FttC) and "Fiber to the Premises" (FttP) respectively. If you use the latter to run a connection all the way to your house, it's usually called "Fiber to the Home" (FttH) instead.
You can read more about these methods in our article about the difference between FttC and FttP.
Answers & Comments
Answer:
Here's how u can do it
Explanation:
If you want to access the internet at home, you'll need an Internet Service Provider (ISP) and a router to connect to the ISP. ISPs often provide a router with their service. This means more than one computer or device in your house can use the broadband connection at the same time.
Verified answer
Answer:
Taking Control From Your ISP
Explanation:
First of all, there's the infrastructure. Your internet connection doesn't go straight out into the internet; it has to arrive at your ISP first. After all, ISP means "Internet Service Provider;" you're not getting internet until you connect to them!
To do this, you need to be connected to your ISP in some way. A wired connection is the most common method. This is where a cable transfers data from your router all the way to your ISP.
If you have fiber, it's likely that you have a copper cable that runs from your home to a roadside cabinet or pole on the curb. Once it reaches this point, it uses fiber the rest of the way to your ISP.
However, some lucky people can get a connection directly to their home. This means they have fiber from their house all the way to the ISP, which is a lot faster than a fiber/copper mix.
These technologies are called "Fiber to the Curb" (FttC) and "Fiber to the Premises" (FttP) respectively. If you use the latter to run a connection all the way to your house, it's usually called "Fiber to the Home" (FttH) instead.
You can read more about these methods in our article about the difference between FttC and FttP.