1. Open your browser to the configuration page of your router:
You can access your router's configuration page through your web browser on your computer connected to your network. If you can't connect top the Wi-Fi because you don't know the password, you can use an Ethernet cable to connect your computer directly to the router. This will bypass the need for the Wi-Fi password.
2. Enter your router's username and password details:
Every router requires a username and password before you can access the interface. In many cases the default username is "admin" and the password is "admin" or "password". Of course this varies from model to model, so you should check your model online to see your exact login information. Most D-Link routers have a default user name of admin and password of admin or blank.
3. Open the Wireless section:
Once you are logged into your router, you will need to find the Wireless section of the configuration page. The exact name varies from manufacturer to manufacturer, but generally you are looking for a "Wireless" or "Wireless Settings/Setup" tab or button.
4. Change the password:
Look for the box labelled "Password", "Passphrase" or "Shared Key". You can enter your new password into this box. Some routers will ask that you type the password again to make sure that you entered it correctly.
Try to create a strong password that would be difficult if not impossible to guess. It should not be related to anything. A strong password is usually at least 8 characters long.
5. Set your security type:
There are three main types of wireless encryption: WEP, WPA, and WPA2. For the most secure network, you should be using WPA2. You may run into issues connecting older devices, however, in which case you could switch to WPA or WPA/WPA2. Selecting WEP is NOT recommended, as WEP encryption is very easy to break.
6. Save your settings:
Once you have updated your new password, click the Apply or Save button. The router will then process the change, at which point any devices currently connected would be disconnected. After your settings are changed, you can connect to your wireless network using your new password.
Answers & Comments
Answer:
1. Open your browser to the configuration page of your router:
2. Enter your router's username and password details:
3. Open the Wireless section:
4. Change the password:
5. Set your security type:
6. Save your settings:
Explanation:
#HopeItsHelp
#Carr0nLearng
#BrainlyFast