Description: Write SR if it is System Requirement, IR if it is Installation Requirement and CR, If it is Connecting a Router.

1. keep at least 2 inches (5 cm) of clear space around the router
2. PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors TCP/IP protocol on each PC.
3. Broadband Internet Access Service (DSL/Cable/Ethernet).
4. Power in your PC and Cable/DSL Modern.
5. Place the Router in a well-ventilated place far from any heater or heating vent.
6. Connect the DSL/Cable Modern to the WAN port on the Router
7. Connect the power adapter to the power socket on the Router, and the other end into an electrical outlet. The Router will start to work automatically.
8. Operation Temperature: 00C-400C (320F-100F)
9. Broadband Internet Access Service (DSL/Cable/Ethernet)
10. Locate an optimum location for the Router. The best place is usually at the center of your wireless network