Remove the memory (RAM) modules by pushing the clips on both ends of the module down. This will cause the module to pop up for easy removal. Do not touch the gold connectors on the chips if you’re reusing the modules. If you're not reusing the RAM, find out how it can be used in other applications.
Person removing RAM memory modules from a desktop computer
Step 7 – Remove power supply unit
Remove the power supply unit by unplugging the remaining connectors, then unscrewing the unit from the frame.
Step 8 – Remove motherboard adapter or expansion cards
Remove any adapter or expansion cards from the motherboard. Although these cards usually slide into preconfigured slots, there can be screws. Do not touch the gold connectors on the cards if you’re reinstalling the cards.
Step 9 – Remove the motherboard
Disconnect all the cables from the motherboard, then unscrew it from the frame by loosening each screw a little bit before going around again to loosen each screw properly. This prevents any potential warping of the motherboard by gradually releasing the tension on it.
All the components should now be out of the computer case. If you’re reusing the case, this is a good time to get rid of all the dust and lint that might have collected.
Computer reassembly
If you are rebuilding the computer, insert the components in the opposite order you removed them, starting with the motherboard. Plug in all the cables as you insert the component; most items will plug into the motherboard and the power supply unit.
Congratulations, you’ve disassembled, and possibly reassembled your computer!
Remove the power supply unit by unplugging the remaining connectors, then unscrewing the unit from the frameStep 8 – Remove motherboard adapter or expansion cards
Remove any adapter or expansion cards from the motherboard. Although these cards usually slide into preconfigured slots, there can be screws. Do not touch the gold connectors on the cards if you’re reinstalling the cards.Step 9 – Remove the motherboard
Disconnect all the cables from the motherboard, then unscrew it from the frame by loosening each screw a little bit before going around again to loosen each screw properly. This prevents any potential warping of the motherboard by gradually releasing the tension on it.
All the components should now be out of the computer case. If you’re reusing the case, this is a good time to get rid of all the dust and lint that might have collected.Computer reassembly
If you are rebuilding the computer, insert the components in the opposite order you removed them, starting with the motherboard. Plug in all the cables as you insert the component; most items will plug into the motherboard and the power supply unit.
Answers & Comments
Answer:
Step 6 – Remove memory (RAM) modules
Remove the memory (RAM) modules by pushing the clips on both ends of the module down. This will cause the module to pop up for easy removal. Do not touch the gold connectors on the chips if you’re reusing the modules. If you're not reusing the RAM, find out how it can be used in other applications.
Person removing RAM memory modules from a desktop computer
Step 7 – Remove power supply unit
Remove the power supply unit by unplugging the remaining connectors, then unscrewing the unit from the frame.
Step 8 – Remove motherboard adapter or expansion cards
Remove any adapter or expansion cards from the motherboard. Although these cards usually slide into preconfigured slots, there can be screws. Do not touch the gold connectors on the cards if you’re reinstalling the cards.
Step 9 – Remove the motherboard
Disconnect all the cables from the motherboard, then unscrew it from the frame by loosening each screw a little bit before going around again to loosen each screw properly. This prevents any potential warping of the motherboard by gradually releasing the tension on it.
All the components should now be out of the computer case. If you’re reusing the case, this is a good time to get rid of all the dust and lint that might have collected.
Computer reassembly
If you are rebuilding the computer, insert the components in the opposite order you removed them, starting with the motherboard. Plug in all the cables as you insert the component; most items will plug into the motherboard and the power supply unit.
Congratulations, you’ve disassembled, and possibly reassembled your computer!
©2017 Micron Technology, Inc. All rights reserved. Information, products, and/or specifications are subject to change without notice. Neither Crucial nor Micron Technology, Inc. is responsible for omissions or errors in typography or photography. Micron, the Micron logo, Crucial, and the Crucial logo are trademarks or registered trademarks of Micron Technology, Inc. All other trademarks and service marks are the property of their respective owners.
Shop Storage Now
5% discount on your next order! Sign up today to receive your welcome offer.
About
Warranty
Email preferences
Privacy
Terms of sale
Terms of use
Compliance
Sustainability
© 2022 Micron Technology, Inc. All rights reserved
Step 7 – Remove power supply unit
Remove the power supply unit by unplugging the remaining connectors, then unscrewing the unit from the frameStep 8 – Remove motherboard adapter or expansion cards
Remove any adapter or expansion cards from the motherboard. Although these cards usually slide into preconfigured slots, there can be screws. Do not touch the gold connectors on the cards if you’re reinstalling the cards.Step 9 – Remove the motherboard
Disconnect all the cables from the motherboard, then unscrew it from the frame by loosening each screw a little bit before going around again to loosen each screw properly. This prevents any potential warping of the motherboard by gradually releasing the tension on it.
All the components should now be out of the computer case. If you’re reusing the case, this is a good time to get rid of all the dust and lint that might have collected.Computer reassembly
If you are rebuilding the computer, insert the components in the opposite order you removed them, starting with the motherboard. Plug in all the cables as you insert the component; most items will plug into the motherboard and the power supply unit.
Explanation: