Electrical Insulation

prepare electrical supplies, materials and tools.

1. Identify electrical supplies, materials and tools needed in electrical/wiring installation
2. Request appropriate supplies, materials and tools for a specific job
3. Receive and inspect electrical supplies, materials and tools

perform mensuration, and calculations.

1. Select measuring tools and instruments
2. Carry out measurement and calculations

interpret technical drawing and plans.

1. Analyze signs, simbols and data
2. Interpet technical drawing and plans

Maintain tools and equipment.

1. Check condition of tools and equipment
2. Perform basic preventive maintenance
3. Store tools and equipment

Practice occupational health and safety

1. Identify hazards and risks
2. Evaluate risks and hazards
3. Control hazards and risks

Answer:

how to prepare electrical supplies, materials and tools.

1.To do the task,electrical tools or equipment are needed to perform the job

2.most of the work cannot use bare hands

3.to prepare the tools and equipmet you need atleast having a tool bags,for your equipment tools for being always prepared.

how to perform mensuration,and calculation

1.prepare your tools for performing mensuration,and calculation.

2.You need;

● pull-push-rule>for measuring long piece of stock.

●zig zag rule>a folded measuring tool

●ruler>for measuring short piece of stock.

●caliper>used for measuring diameter

●try square>used for checking flatness and squareness.

how to interpret technical drawing and plans

1.start by looking at the tittle book on each drawing

2.parallel projections include orthographic drawings.flats,multi-view drawings of the subject

how to maintain tools and equipment

1.making sure your device are properly stored,clean and well.

2.keep them sharpened

3.keep them lubricated

how to practice occupational health and safety

1.maintain correct posture

2.use equipment properly

3.make use of mechanical aids.