Directions: At home, check all your tools for possible corrosive and rusting. Apply the preventive maintenance of a certain tool. Complete the table about preventive maintenance.
1.Wipe them down: One of the simplest ways you can clean off your tools and keep them in good condition is simply wiping them off. Take an old towel or rag to wipe off the debris, grease or dust left over on the tools before storing them. Leaving grease and other materials on the tools can end up harming them, so it's crucial to take this step.
2.Check for damage: After wiping down your hand tools, examine them for any signs of damage. Keep an eye out for cracks, splinters or breaks that could harm people during use or cause the tool to lose its effectiveness. In addition to looking for damage, search for corrosion or rust. If you find any damage, set the tool aside until you can repair or replace it.
3.Use a powered grinder for striking tools: Over time, your striking tools' metal heads will start to spread out and form a ridge at the edge of the metal. Eventually, this ridge will continue to spread and grow thinner, causing it to break. This breakage can lead to the metal head separating from the rest of the tool, potentially harming those in the area. To prevent breakage, regularly use your grinder to grind off any edges that form.
4.Lubricate tools: Once all your cleaning is finished and you've checked for any damage, it's a good practice to lubricate the tools that have adjustable parts with an all-purpose oil, like WD-40. You can also lightly spray down other metal tools with the oil, but make sure no oils get on the handles. Use a rag to get rid of extra oil before you store the tool. This lubricant can help prevent rust and corrosion.
Answers & Comments
Answer:
1.Wipe them down: One of the simplest ways you can clean off your tools and keep them in good condition is simply wiping them off. Take an old towel or rag to wipe off the debris, grease or dust left over on the tools before storing them. Leaving grease and other materials on the tools can end up harming them, so it's crucial to take this step.
2.Check for damage: After wiping down your hand tools, examine them for any signs of damage. Keep an eye out for cracks, splinters or breaks that could harm people during use or cause the tool to lose its effectiveness. In addition to looking for damage, search for corrosion or rust. If you find any damage, set the tool aside until you can repair or replace it.
3.Use a powered grinder for striking tools: Over time, your striking tools' metal heads will start to spread out and form a ridge at the edge of the metal. Eventually, this ridge will continue to spread and grow thinner, causing it to break. This breakage can lead to the metal head separating from the rest of the tool, potentially harming those in the area. To prevent breakage, regularly use your grinder to grind off any edges that form.
4.Lubricate tools: Once all your cleaning is finished and you've checked for any damage, it's a good practice to lubricate the tools that have adjustable parts with an all-purpose oil, like WD-40. You can also lightly spray down other metal tools with the oil, but make sure no oils get on the handles. Use a rag to get rid of extra oil before you store the tool. This lubricant can help prevent rust and corrosion.
Explanation:
Sana po Makatulong ang sagot namen