Directions: Answer the following statement. Write TRUE if the statement is correct and write FALSE
if the statement is incorrect. Use a separate sheet of paper for your answer.
_________1. Fasten the upper left portion of the drawing paper followed by the lower right
portion and finally the remaining corners.
_________2. Slide the working head of the T-square against the working edge of the drawing
table. The two edges should be in constant contact until the desired position.
_________3. Press firmly the T-square against the working edge of the drawing table.
_________4. Maintain the position of the pencil while you glide lightly on the blade of the T-square.
_________5. Draw the line from left to right rotating occasionally to produce uniform line
weights.
_________6. With the left hand pressing the T-square and the triangle against the drawing
board, draw the line upward, rotating the pencil slowly between the thumb and
forefinger.
_________7. Place the triangle on top of the blade of the T-square with the vertical edge on the
left.
_________8. Use 45 degrees triangle or 30 degrees x 60 degrees to draw vertical lines.
_________9. Press the head of the T-square against the working edge of the drawing table and
lean the pencil to the desired direction of the line inclined at more or less 60
degrees with the drawing table.
_________10. Draw the line from left to right rotating occasionally to produce uniform line weights