Direction: Identify the following procedures in storing hand tools, power tools and equipment. Choose HT if it is for Hand Tools, PT for Power Tools and EQ for Equipment. *
15 points
HT PT EQ
Repair loose handles.
Oil metal parts to prevent rust.
Lightly sand rough wooden handles and apply linseed oil.
Store equipment in a clean dry storage area.
Sharpen dull blades or replace worn blades according to the owner’s manual.
Clean the air filter.
Rinse and clean spray equipment after each use.
Lubricate moving parts.
Clean dirt and debris from tools after each use.
Change the oil.
Replace spark plugs.
Sharpen blades of cutting tools.
Protect surfaces of cutting tools in storage.
Read and follow the maintenance schedule in the owner’s manual for each piece of power equipment.
Store tools in a clean dry storage area.
Repair loose handles.
Oil metal parts to prevent rust.
Lightly sand rough wooden handles and apply linseed oil.
Store equipment in a clean dry storage area.
Sharpen dull blades or replace worn blades according to the owner’s manual.
Clean the air filter.
Rinse and clean spray equipment after each use.
Lubricate moving parts.
Clean dirt and debris from tools after each use.
Change the oil.
Replace spark plugs.
Sharpen blades of cutting tools.
Protect surfaces of cutting tools in storage.
Read and follow the maintenance schedule in the owner’s manual for each piece of power equipment.
Store tools in a clean dry storage area.​