Direction: Fill in the blank. Write your answers on a separate sheet of paper.
1. The purpose of an antistatic wrist strap is to ______ the electrical charge between you and the equipment.
2. Tum the screwdriver ________ to tighten the screw.
3. Turn the screwdriver ________ to loosen the screw,
4. Use a ______ head screwdriver with crosshead screws.
5. On electrical components, an excessive buildup of dust will act like an _______ and trap the heat.
6. When compressed air is used to clean inside the computer, the air should be blown around the components with a minimum distance of ______ inches from the nozzle.
7. Pencils should not be used inside the computer to change the setting of switches or to pry off jumpers because the tip contains _______ which can act as a conductor and may damage the computer components.
8. To clean the screens of CRT monitors, dampen a soft, clean, lint-free cloth with _______ water and wipe the screen from top to bottom.
9. Clean the contacts on ________ components with alcohol.
10. Use a ________ to loosen and tighten bolts that have a hexagonal
(six-sided) head.
Answer:
1. Equalize
2. clockwise
3. counterclockwise
4. phillips head screw
5. insulator
6. four
7. lead
8. distilled
9. isopropyl
10. hex driver
tama po yan
Answers & Comments
Answer:
Explanation:
Ede wiw
Answer:
1. Equalize
2. clockwise
3. counterclockwise
4. phillips head screw
5. insulator
6. four
7. lead
8. distilled
9. isopropyl
10. hex driver
Explanation:
yan po answer❤️
my answer is base on my research ❤️