Describe the manufacture of H2SO4 by contact process.
Answers & Comments
Tejass
The contact process is the current method of producing sulfuric acid in the high concentrations needed for industrial processes. Platinum used to be the catalyst for this reaction; however, as it is susceptible to reacting with arsenic impurities in the sulfur feedstock, vanadium(V) oxide (V2O5) is now preferred.
49 votes Thanks 42
Piyush891 Sulphuric acid is manufactured by the contact process. It involves the following steps:
Step(i):
Sulphur or sulphide ores are burnt in air to form SO2.
Step(ii):
By a reaction with oxygen, SO2 is converted into SO3 in the presence of V2O5 as a catalyst.
Step (iii):
SO3 produced is absorbed on H2SO4 to give H2S2O7 (oleum). This oleum is then diluted to obtain H2SO4 of the desired concentration. In practice, the plant is operated at 2 bar (pressure) and 720 K (temperature). The sulphuric acid thus obtained is 96-98% pure.
Answers & Comments
Sulphuric acid is manufactured by the contact process. It involves the following steps:
Step(i):
Sulphur or sulphide ores are burnt in air to form SO2.
Step(ii):
By a reaction with oxygen, SO2 is converted into SO3 in the presence of V2O5 as a catalyst.
Step (iii):
SO3 produced is absorbed on H2SO4 to give H2S2O7 (oleum). This oleum is then diluted to obtain H2SO4 of the desired concentration. In practice, the plant is operated at 2 bar (pressure) and 720 K (temperature). The sulphuric acid thus obtained is 96-98% pure.