Changing of flat tire. Instruction: Drag the items below to re-arrange to its correct sequence. 1 Locate and bring out the needed tools; tire wrench, hydraulic or scissor jack, and inflated spare tire. 2 Turn on the hazard light. 13 Place the jack somewhere secure and stable underneath the vehicle and start lifting the vehicle. 14 Put up the emergency warning triangle on incoming traffics from the rear side of the vehicle. 5 Fully remove the lug nuts. 6 Replace the flat tire with the spare tire. Remove the jack and hide all tools, flat tire and equipment used. 8 Release the jack by lowering it until the tire is rested on the surface. 9 Fully tighten the lug nuts but not too much to avoid loose thread. 10 Apply the handbrake or put a stone, wood, or metal tire stopper. 11 Remove the hubcaps if any and loosen the lug nuts of the flat tire. 12 Re-install the lug nuts in a star sequence but do not fully tighten. 13 Remove the flat tire and place it away from incoming traffic.​