! ANSWER !

UPPER THREADING:

• Turn on the sewing machine.

• Raise the presser foot lever.

• Press needle position button(needle position button) once or twice to raise the need

• Remove the spool cap that is inserted onto the spool pin.

• Place the spool of thread onto the spool pin.

• Slide the spool cap onto the spool pin.

• While holding the thread lightly with your right hand, pull the thread with your left hand, and then pass the thread behind the thread guide cover and to the front.

• Pass the thread under the thread guide cover from the back to the front.

Hold the thread with your right hand so that there is no slack in the thread that is pulled out, and then pass the thread under the thread guide cover with your left hand.

• Thread the machine by guiding the thread along the path indicated by the number on the machine.

• Pass the thread into the thread take-up lever from the right to the left.

• Pass the thread behind the needle bar thread guide.

LOWER THREADING:

• Put the spool of thread on the spool pin.

• Bring the thread to the thread guide .

• Pull the thread between the metal disc of the tension.

• Bring the thread up to the thread take up lever and raise it as it goes.

• Pull the thread down to the thread guide.

• Pull it through the lower thread guide.

• Thread the needle.

HOPE THIS HELPS

THIS IS A RIGHT ANSWER, MARK ME BRAINLIEST PLEASE<3