Answer:

1: Keep lenses clear of slides

When using your microscope and adjusting the focus you will need to lower the objective lens down as far as it will go.

2: Clean after using immersion oil

If using immersion oil, always ensure the objectives are cleaned immediately after use.

3: Cover when not in use

All microscopes are sold with dust covers. Always keep your microscope covered when not in use even if the microscope is stored in a cabinet.

4: Look after the bulb

After using the microscope, turn off the illuminator and wait for it to cool for several minutes before putting it away.

5: Store in a clean, dry place

Make sure you do not store your microscope in an area that has corrosive chemical fumes that can destroy lenses or metal parts or beside solutions that may leak.

6: Only use special lens paper or wipes for cleaning the lenses

Microscope lenses can easily be scratched and should be treated with great care. Use an aspirator to remove dust.

7: Perform an annual maintenance check

On an annual basis moving parts on the microscope should be cleaned and lubricated. Clean grease and dirt from sliding surfaces using a clean cloth.

8: Have your microscope serviced professionally

A rule of thumb for frequency of servicing is every 200 hours of use or every 3 years, whichever comes first.

pa brainliest ans pho tnx

Explanation:

1.ill always clean it up the proper way

2.Put it somewhere that no one of your siblings can play with it.

3.Remember to give it back to someone you borrowed it too.