Acttity 1
Write TRUE if the steps in preparing the machine for sewing is correct and
FALSE if it's not.
1. In threading the sewing machine, the spool should be place on the spool pint,
2. After releasing the balance wheel to wind the bobbin, next step is raising the
thread up to the highest point
3. To set the needle it is necessary to tighten the needle clamp screw
4. Lina is winding the thread on the bobbin. She lit the bobbin carefully into
the winder
5. We need to insert the needle
upward into the needle clamp with the flat side
facing right when winding the thread on the bobbin.
6. Sewing machines are operated by hand or by an electric motor,
7. To sew well it needs more practice in treadling until you can produce a
smooth rhythmic motion.
8. To set the needle properly, it is important that the bar slot are properly
positioned
9. Every girl or boy who wants to use the sewing machine should be skillful in
the basic operation of setting the needle only.
10 In treadling, we must first place our feet on the treadle with one lower than
the other​