Activity 1

Write TRUE if the steps in preparing the machine for sewing is correct and FALSE if it’s not.
_____ 1. In threading the sewing machine, the spool should be place on the spool pin.
_____ 2. After releasing the balance wheel to wind the bobbin, next step is raising the thread up to the highest point.
_____ 3. To set the needle it is necessary to tighten the needle clamp screw.
_____ 4. Lina is winding the thread on the bobbin. She fit the bobbin carefully into the winder.
_____ 5. We need to insert the needle upward into the needle clamp with the flat side facing right when winding the thread on the bobbin.
_____ 6. Sewing machines are operated by hand or by an electric motor.
_____ 7. To sew well, it needs more practice in treadling until you can produce a smooth rhythmic motion.
_____ 8. To set the needle properly, it is important that the bar slot are properly positioned.
_____ 9. Every girl or boy who wants to use the sewing machine should be skillful in the basic operation of setting the needle only.
____ 10. In treadling, we must first place our feet on the treadle with one lower than the other.

Please Don't Do Pranks And Answer Politely.
You Don't Need To Rush Take Your Time, Thank you​