Answer:

1)Desoldering & Reworking Tools

These tools are designed for use with PCBs, wiring or components that have been soldered. Desoldering & reworking tools are hand-held devices that supply heat from metal tips, hot air from nozzle guns and pump-action to remove solder.

2)A wire stripper is a portable handheld tool used by workers, especially electricians, for removing the protective coating of an electric wire in order to replace or repair the wire. It is also capable of stripping the end portions of an electric wire in order to connect them to other wires or to terminals.

3)Diagonal pliers are pliers intended for the cutting of wire. The plane defined by the cutting edges of the jaws intersects the joint rivet at an angle or "on a diagonal", hence the name.

4)Needle-nose pliers are both cutting and holding pliers used by artisans, jewellery designers, electricians, network engineers and other tradesmen to bend, re-position and snip wire. Their namesake long nose gives excellent control while the cutting edge near the pliers' joint provides "one-tool" convenience.

5)A drill or mini drill is a tool that is mainly used to make circular holes or hammer in fasteners. There are many types of drills: some are hand-powered, others use electricity or compressed air as the driving force, and a minority are powered by a combustion engine.

6)Magnifying glasses are a simple optical devices used for viewing details of objects with some magnification. They are sometimes regarded as being the same as loupes, but precisely speaking a loupe is used in a close distance from the eye, while magnifying glasses (or hand lenses) are held at a larger distance.

7)A soldering iron stand is used to keep the hot soldering iron away from you and the work area. A soldering iron stand i made out of metal and comes with a clening sponge to clean the soldering irons tip.

8)A screwdriver is a tool, manual or powered, used for screwing and unscrewing screws. A typical simple screwdriver has a handle and a shaft, ending in a tip the user puts into the screw head before turning the handle.

9)A soldering iron is a hand tool used to heat solder, usually from an electrical supply at high temperatures above the melting point of the metal alloy. This allows for the solder to flow between the workpieces needing to be joined.

10)Used primarily for boring holes in nearly all materials, the electric drill can also be used for a variety of other tasks, facilitated by a number of accessories and attachments. These include sanding, screwdriving, grinding, and mixing paint to name but a few.