A. True or False
Write True if the Statement is True and Write the correct answer if the statement is False.
_____________1. In using ESD Tool when connecting the wire to equipment that you are
working on, we must a choose a painted metal surface.
_____________2. In using antistatic mat, it is advised to clip the mat to the case to provide a
grounded surface on which you can place parts as you remove them from the system.
_____________3. To create the cleaning solution for cleaning LCD screens, mix one drop of
dishwashing liquid and four ounces of water.
_____________4. Clean LCD Screen with compressed air or a small, hand-held vacuum cleaner
with a brush attachment.
_____________5. To loosen and tighten bolts with a hexagonal (six-sided) head, use a hex
driver.
_____________6. In using antistatic wrist strap, the metal on the back must remain in contact
with your skin at all times.
_____________7. Tip in using antistatic mat, lay the mat on the workspace next to or under the
computer case.
_____________8. In cleaning component contacts, it is advised to clean the contacts on ethyl alcohol components. Dont use alcohol to rub.
_____________9. Clean computer cases and monitor outdoors on a damp, lint-free cloth with a
mild cleaning solution.
_____________10. You should use the component retriever, needle-nose pliers, and tweezers
to position and remove pieces that could be impossible to touch with your fingertips.