Pretest LO 1
Directions: Read the statement carefully and identify what is being described or defined.
Choose your answer from the words inside the box.
Hammer
Circuit Breaker
Long Nose Pliers
Electric Drill
Electrician's Knife
Utility box Portable
Wire Stripper
Connectors
Philips Screw Driver
Combination Pliers
Fuse
Male Plug
Conduits
Junction Box
Stubby Screw Driver
1.
This is used for griping, holding, cutting electrical wires and cables and even small nails.
2. This is used for cutting and holding fine wires.
3.
It is used to drive screws with cross slot heads.
4. This is tools used in driving or pounding and pulling out nails.
5. A tool used for removing insulation of medium sized wires ranging from gauge #10 to
gauge #16.
6. A small drilling machine with a chuck capacity of 4 to 3/81. It is used in making holes
on metal sheets and concrete walls.
7. Comes in either Standard or Philips screw driver with short shank or blade and shorted
handle used to turn screws in tight space where standard screw driver cannot be used.
8. Used by linemen to remove insulation of wire and cables in low and high voltage
transmission lines.
9. Is a device inserted to a convenience outlet to conduct electric current.
10. This is a circuit protective device that automatically blows and cut the current when an
over load or short circuit happens.
11. This is a rectangular shaped metallic or plastic (PVC) material in which flush type
convenience outlet and switch are attached.
12. Are electrical materials used as the passage of wires for protection and Insulation.
13. Are used to attach metallic or non-metallic conduit to the junction or utility boxes.
14. This is a protective device used to automatically cut off the current when trouble in the
circuit such as short circuit or over load occurs.
15. Is an octagonal shaped electrical material where the connections or joints of wires are
being done.


Please paki sagutan ng maayos kailngan napo kase!!​