1. This is used for griping, holding, cutting electrical wires and cables and even small nails. Usually used by tinemen in doing heavy tasks.

2. Used for cutting and holding fine wires. This can reach tight space or small opening where other pliers cannot reach and also used in making terminal loops of copper wires

3. This has a cross tip resembling a positive (+) sign. It is used to drive screws with cross slot heads.

4. This is tools used in driving or pounding and pulling out nails.

5. A tool used for removing insulation of medium sized wires ranging from gauge #10 to gauge #16.

6. A small drilling machine with a chuck capacity of Al to 3/81. It is used in making holes on metal sheets and concrete walls.

7. Comes in either Standard or Philips screw driver with short shank or blade and shorted handle used to turn screws in tight space where standard screw driver cannot be used.

8. Used by linemen to remove insulation of wire and cables in low and high voltage transmission lines.

9. Is a device inserted to a convenience outlet to conduct electric current. A flat cord is attached to it on one end and the other end is connected to a current consuming instrument or appliance.

10. This is a circuit protective device that automatically blows and cut the current when an over load or short circuit happens.

11. This is a rectangular shaped metallic or plastic (PVC) material in which flush type convenience outlet and switch are attached.

12. Are electrical materials used as the passage of wires for protection and Insulation.

13. Are used to attach metallic or non-metallic conduit to the junction or utility boxes.

14. This is a protective device used to automatically cut off the current when trouble in the circuit such as short circuit or over load occurs.

15. Is an octagonal shaped electrical material where the connections or joints of wires are being done. It is also where the flush type lamp holder is attached.

yung nasa picture yung choices ​