Read the statement carefully and identify what is being described or
defined. Choose your answer from the words inside the box.
______________1. This is used for griping, holding, cutting electrical wires and cables
and even small nails. Usually used by linemen in doing heavy
tasks.
______________2. Used for cutting and holding fine wires. This can reach tight space
or small opening where other pliers cannot reach and also used
in making terminal loops of copper wires.
______________3. This has a cross tip resembling a positive (+) sign. It is used to
drive screws with cross slot heads.
______________4. This is tools used in driving or pounding and pulling out nails.
______________5. A tool used for removing insulation of medium sized wires ranging
from gauge #10 to gauge #16.
______________6. A small drilling machine with a chuck capacity of ¼‖ to 3/8‖. It is
used in making holes on metal sheets and concrete walls.
______________7. Comes in either Standard or Philips screw driver with short shank
or blade and shorted handle used to turn screws in tight space
where standard screw driver cannot be used.
______________8. Used by linemen to remove insulation of wire and cables in low
and high voltage transmission lines.
______________9. Is a device inserted to a convenience outlet to conduct electric
current. A flat cord is attached to it on one end and the other end
is connected to a current consuming instrument or appliance.
______________10. This is a circuit protective device that automatically blows and cut
the current when an overload or short circuit happens.
Answers & Comments
Answer:
1. Combination Pliers
2. Long Nose Pliers
3. Philips Screwdriver
4. (Claw) Hammer
5. Wire Stripper
6. (Portable) Electric Drill
7. Stubby Screwdriver
8. Electrician's Knife
9. Male Plug (a)
10. Fuse
:D
Answer:
1.Combination pliers Pliers (Linesman's Pliers) This is used for gripping , holding, and cutting electrical wires and cables and even small nails. They are usually used by linemen in doing heavy tasks.
2.long nose pliers - used for cutting and holding fine wires. This can reach tight space or small opening where other pliers cannot reach and also used in making terminal loops of copper wires
3.Philips Screw Driver
Philips Screw Driver- has a cross tip resembling a positive (+) sign. This is used to drive screws with cross slot heads.
4.Claw hammer or hammer
is a tool primarily used for driving nails into, or pulling nails from, some other object
5.Wire stripper
Wire Stripper - A tool used for removing insulation of medium sized wires ranging from gauge #10 to gauge #16.
6.Portable electric Drill
Portable Electric Drill A small drilling machine with a chuck capacity of ¼” to 3/8”. It is used in making holes on metal sheets and concrete walls
7.Stubby screw driver
Stubby Screw Driver - comes in either Standard or Philips screw driver with short shank or blade and a shorted handle used to turn screws in tight space where standard screw driver cannot be used.
8.Electrician's knife
Electrician's Knife - used by linemen to remove insulation of wire and cables in low and high voltage transmission lines.
9.Male plug
Male plug- a device inserted to a convenience outlet to conduct electric current. A flat cord is attached to it on one end and the other end is connected to a current consuming instrument or appliance.
10.Fuse
Fuse - a circuit protective device that automatically blows and cut the current when and over load or short circuit happens.
#CARRYONLEARNING