_________1. This is used for griping, holding, cutting electrical wires and cables and even small nails. Usually used by linemen in doing heavy tasks. __________2. Used for cutting and holding fine wires. This can reach tight space or small opening where other pliers cannot reach and also used in making terminal loops of copper wires __________3. This has a cross tip resembling a positive (+) sign. It is used o drive screws with cross slot heads. __________4. This is tools used in driving or pounding and pulling out nails __________5. A tool used for removing insulation of medium sized wires ranging from gauge #10 to gauge #16. __________6. A small drilling machine with a chuck capacity of to 3/8". It is used in making boles on metal sheets and concrete walls.
__________7. Comes in either Standard or Philips screw driver with short shank or blade and shorted handle used to turn screws in tight space where standard screw driver cannot be
__________8. Used by finemen to remove insulation of wire and cables in low and high voltage transmission lines. __________9. Is a device inserted to a convenience outlet to conduct electric current. A fiat cand is attached to it on one end and the other end is connected to a current consuming instrument or appliance.
__________10. This is a circuit protective dezice that autematically blows and cut the current when an over load or short circuit bappens.
__________11. This is a rectangular shaped metallic or plastic (PVC) material in which flush pype convenience outlet and swich are attached.
__________12. Ar electrical materials used as the passage of wires for protection and Insulation
__________13. Are used to attach metallic or non-metallic conduit to the junction or utility boxes
___________14. This is a protective device used to automatically cut off the current when trouble in the circuit such as short circuit or over load occurs. ___________15. is an octagonal shaped electrical material where the connections or joints of wires are being done. It is also where the flush type lamp holder is attached
__________7. Comes in either Standard or Philips screw driver with short shank or blade and shorted handle used to turn screws in tight space where standard screw driver cannot be
__________8. Used by finemen to remove insulation of wire and cables in low and high voltage transmission lines. __________9. Is a device inserted to a convenience outlet to conduct electric current. A fiat cand is attached to it on one end and the other end is connected to a current consuming instrument or appliance.
__________10. This is a circuit protective dezice that autematically blows and cut the current when an over load or short circuit bappens.
__________11. This is a rectangular shaped metallic or plastic (PVC) material in which flush pype convenience outlet and swich are attached.
__________12. Ar electrical materials used as the passage of wires for protection and Insulation
__________13. Are used to attach metallic or non-metallic conduit to the junction or utility boxes
___________14. This is a protective device used to automatically cut off the current when trouble in the circuit such as short circuit or over load occurs. ___________15. is an octagonal shaped electrical material where the connections or joints of wires are being done. It is also where the flush type lamp holder is attached
Add an Answer
More Questions From This User See All
Answers & Comments
1) combination pliers
2) long nose pliers
3) Philips screw
4) hammer
5) wire stripper
++ sa comments
2) long nose pliers
3) Philips screw
4) hammer
5) wire stripper