4. You need to take off a portion at the end of the wire before it is connected to terminals of other electrical materials. What electrical is ideal to use? *
A. Wire gauge
B. Wire stripper
C. Pliers
D. Long nose pliers
5. This is used to get electricity in a distance. *
A. Electric cord
B. Electrical wire
C. Extension line
D. Extension wire
6. You want to test the incandescent bulb to know if it is in good condition. What are you doing to use? *
A. Bulb tester
B. Light tester
C. Bulb meter
D. Light meter
7. It is a gadget used to give light or decoration in a room. *
A. Pin light
B. Lampshade
C. 3-way light
D. Room colored light
8. It is a gadget use to call the attention of the owner of the house. *
A. Extension cord
B. Lamp shade
C. Bulb tester
D. Doorbell
9. You noticed that the bulb receptacle at your room are not functioning. If you are going to do the repair works, what would be the first thing to do? *
A. Off the light switch
B. Unscrew the receptacle
C. Turn off the main switch
D. Remove the bulb from the receptacle
10. What is the first thing to do if you are going to make minor repair in the main electrical switch? *
A. Turn on the main switch.
B. Open the cover of the main switch
C. Close the cover of the main switch
D. Turn off the current in the main switch.

This is a required question
11. In doing electrical gadgets, what is the most important thing to remember in using tools? *
A. Used the tool according to their uses.
B. Use only appropriate tools and equipment.
C. Make sure that the tools and equipment are clean.
D. Use only tools and equipment with non-conducting handles when working on electrical devices.
12. What is the first thing to do before making electrical gadgets? *
A. Prepare all the materials and tools.
B. Identify the materials and tools.
C. Make sure that the parts are complete.
D. Gather all the materials needed.
13. Usual defects of table are loosening of its fixing materials such as nails, screws and bolts. This is caused by either loose of nail’s hole or the fixing material itself. How are you going to fix it? *
A. Replace all parts of the table
B. Identify the materials and tools.
C. Find the loose part and fix it with glue.
D. Fasten the part or parts thoroughly, place a brace to support the loosen legs.
14. It is the process of separating things and putting them in a particular order. *
A. Sorting
B. Straightening
C. Sustaining
D. Standardizing
15. In straightening, you must decide the right places for everything. What does it mean? *
A. Have the right type of product for your needs.
B. A place for everything and everything in its place.
C. Store items not close as possible to where you will use them.
D. Don’t arrange items so that you don’t have to move something else to get to them.
​