4. _________________ is the pressure filling of openings or voids.
5. The joint between two pieces of material formed by a notch and
tilled projection is called ___________________.
6. _____ or partially cured sealant will not wet the surface to which it is to be
applied as fresh material and, consequently, will not have satisfactory
adhesion.
Answers & Comments
Answer:
5.jog•gle. 2 .
Explanation:
yan lng po alam ko.. ok lng po ba?
2.)700F
3.)refrigerated storage or freshly mixed
4.)injection sailing
5.)joggle
6.)stiff
7.)900F and 1000F 8.) clean surface
9.)sealant
10.)removing excess sealant/adhesive