2. 3. 4. 5. 6. The wood is hold at an angle while the gauge pressed and tilted to let the spur trail This tool is similar to a hammer but its head and handle are made of hardwood. The upper part of the socket chisel blade is shaped like a hollow cone in which the handle is set. The teeth of this type of saw are set alternatively to the right and left so that the cut is wider than the thickness of the saw blade. It is a strong thin wooden board consisting of two or more layers glued and pressed together with the direction of the grain These are short, slender, sharp-pointed metal pins with a raised helical thread running around and a slotted head. They are commonly made of steel and have large flat heads and pointed ends. It is a long metal object that screws into a nut. This is a kind of wood that is sawn for commercial 7. 8. g. 9 10. purposes.
Answers & Comments
Answer:
2. Marking Gauge
3. Mallet
4. Socket Firmer Chisel
5. Rip Saw
6. Plywood
7. Screw
8. Nail
9. Bolt
10. Lumber Wood
Definition:
2. Marking Gauge – The marking gauge is used to mark lines parallel to the sides, edges, or ends of a board.
2. Marking Gauge – The marking gauge is used to mark lines parallel to the sides, edges, or ends of a board.3. Mallet – A hammer with a large, usually wooden head, used especially for hitting a chisel.
2. Marking Gauge – The marking gauge is used to mark lines parallel to the sides, edges, or ends of a board.3. Mallet – A hammer with a large, usually wooden head, used especially for hitting a chisel.4. Socket Firmer Chisel – Used to shape and finish wood by hand.
5. Rip Saw – A wood saw that is specially designed for making a rip cut, a cut made parallel to the direction of the wood grain.
6. Ply Wood – A material manufactured from thin layers or "plies" of wood veneer that are glued together with adjacent layers having their wood grain rotated up to 90 degrees to one another.
7. Screw – A short, slender, sharp-pointed metal pin with a raised helical thread running around it and a slotted head, used to join things together by being rotated so that it pierces wood or other material and is held tightly in place.
8. Nail – A small metal spike with a broadened flat head, driven typically into wood with a hammer to join things together or to serve as a peg or hook.
9. Bolt – A fastener which has only part of its shaft threaded.
10. Lumber Wood – Collective term for harvested wood, whether cut into logs, heavy timbers, or members used in light-frame construction