1.When a technician installs a new CPU, what will help maintain even
contact and heat distribution between the CPU and heat sink?
A. Glue C. Silicon Spray
B. Graphite paste D. Thermal compound
2.When installing a CPU in a ZIF socket, how should the technician align
the pins to avoid damage?
A. Pin 1 is always aligned with the corner opposite the base of the lever
B. Pin 1 on the CPU is aligned with Pin 1 on the ZIF socket
C. Pin 1 is aligned wth the corner closest to the memory
D. The removed corner of the CPU is always aligned with the corner
opposite Pin1
3.Juan is a computer technician and he is installing additional memory in a
computer. How can the technician guarantee that the memory is correctly
aligned?
A. The label on the memory module should always face the CPU
B. A notch in the memory module should be aligned with a notch in the
memory slot
C. The arrows on the memory module should be aligned with the arrows
on the motherboard slot
D. All memory and motherboard slots are color coded, with one red end
and one blue end.
4.When mounting a motherboard in a computer case, what does the
technician
used to prevent the motherboard from touching the bottom of the case?
A. Ground fault isolator C. Silicon Spray
B. Ground straps D. Standoff
5.When installing adapter cards in a computer, how should a technician
properly secure the card?
A. Install the card and attach it to the expansion slot using thermal paste
B. Install the card and attach it to the motherboard using thermal pads
C. Install the card and secure it using metal retaining clips located on
the expansion slot
D. Install the card and secure it to the case with a screw