1.Fill in the given format of a simple flowchart with your own process your own process. 2.Makesure you have a title for your flowchart. 3.Refer to the example given below,so you can make your own. Help me I need this now ... *ASAP...
1. Look for a screw and check its head to identify the screw to be used.
2. If you find out that the screw is a slot type then use the flat head screwdriver and if it is a shaped like a four- pointed star then you can use the Star screw.
3. Determine if you want to loosen or tighten the screw.
4. Then put the screwdriver on a screw and start rotating clockwise or counterclockwise depends on the work to be done.
Answers & Comments
Answer:
●Flat Screw and Star Screw●
1. Look for a screw and check its head to identify the screw to be used.
2. If you find out that the screw is a slot type then use the flat head screwdriver and if it is a shaped like a four- pointed star then you can use the Star screw.
3. Determine if you want to loosen or tighten the screw.
4. Then put the screwdriver on a screw and start rotating clockwise or counterclockwise depends on the work to be done.
5. Check your work after.