14. The following are the tips why we need to check all pattern
pieces laid on the fabric before cutting. Which is NOT?
A. Check completeness of garment parts
B. Estimate the materials needed
C. Check duplication of garment parts
D. Ensure the size of the gaments
15. One characteristics of liquid marking pen used by tailors.
A Easily removed
B. Cannot be affected by dry cleaning
C Stains the garment
D. Stays longer when washed.
16. In what direction the dressmaking carbon paper should be
inserted between the pattern and the fabric?
A Up
C. Down
B. Left D. Right
17. One reason why we press seam before sewing is to
A. Be done on time C. be more accurate
B. Make work faster D. obtain good fit
18. Which of the following is the most appropriate cleaning
material for the soleplate of the iron?
A Hot iron cleaner C. Candle cleaner
B. Surface cleaner D. Grease cleaner
19. What is the basic structural element of the gament done by
joining two or more pieces of fabric together?
A. Stitches
C. Seam
B. Partners
D. Finishes
20. It is known as the simplest type of seam.
A Flat-full
C. Plain
B. French
D. Lapped
21. A characteristic of a well-constructed seam
A. Smooth and even C.Loping stitches
B. Variety of stitch width D. Visible of at right side
22. Why do we over lock the raw edge of the fabric?
A. For security
C. to prevent from raveling
B. To add aesthetic sense D. to save fibers
23. What is the recommended fastener for sleeping garment?
A String
C. hook-and-eye
D. Buttons
B. Safety Pins
24. This is where a well-sewn garment stants
A. Drafting pattern
C. Pattern Lay-out
Measurement D. Cutting Table.
25. The tool used to cut cloth
A. Scissors
C. Cutter
B. Dressmaker shears D. Ripper

guys patolong po hindi ko po alam yong sagot plss po patolong sana po wag mali yong sagot mababa lang po yong grades ko plss help give me real awnser tama po na sagot plss guys ​